Every Gate Service We Offer in Henderson, NV
One team for every gate job in Henderson — from driveway gates to welding & gate fabrication.
Henderson Gate Pros handles residential and commercial gate projects across Henderson and the Las Vegas Valley. From driveway gates to welding & gate fabrication, every service below is handled by our own team and backed by our workmanship guarantee.
Start on the Henderson Gate Pros homepage, read what people in Henderson say on our about page, or call (844) 511-2320 and describe what you need in your own words.
Driveway Gates
Driveway gates are the single biggest change you can make to how a property reads from the street, and in Henderson they are also working equipment that has to survive ultraviolet exposure, blowing grit, and a hundred cycles a week. We design, fabricate, automate, and repair driveway gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, from a single 12-foot swing leaf to a 30-foot cantilever slide.
Swing Gates
Swing gates are the default driveway gate whenever the ground is level and there is arc room behind the opening, and they are the cheapest way to get a real gate that works. We build single and dual swing gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, hung on hinge posts sized for the leaf instead of whatever the fence crew left behind.
Sliding & Rolling Gates
Sliding gates are the answer when the driveway slopes up, when there is no arc room for a leaf to swing, or when a car would otherwise have to wait in the road while the gate opens. We build and repair rolling V-track slide gates and cantilever slide gates in steel and aluminum, with sealed-bearing rollers and covered track wherever the design allows it, because open track in this valley fills with grit.
Wrought Iron Gates
Wrought iron gates are the entrance most Henderson homeowners picture first, and they are also the ones most often built from stock too light to hold their shape. We forge and weld custom wrought iron and ornamental iron driveway gates from solid bar and heavy-wall tube in our own shop, then blast, prime, and powder coat them inside and out before they ever go on a truck.
Ornamental Steel Gates
Ornamental steel gates give you the mass and presence of iron at a lower price and with a lighter leaf for the operator to move. We fabricate ornamental steel driveway gates from square and rectangular tube in 14-gauge and 16-gauge wall, welded and finished exactly the way we finish iron, then matched to an operator that runs comfortably below its rated load.
Aluminum Gates
Aluminum gates do not rust and weigh roughly a third of what steel does for the same dimensions, which is easier on hinges, posts, and the operator. We build welded aluminum driveway gates from 6061 and 6063 extrusion, not the bolted thin-wall panel kits that gave aluminum its cheap reputation in the first place.
Wood Gates
Wood gates give a warmth that metal cannot match, and in the high desert they need a steel frame underneath or they will twist inside two summers. We build cedar, redwood, and composite-clad driveway gates on fully welded steel frames, so the steel carries the structure and the wood does the looking.
Vinyl & Composite Gates
Vinyl and composite gates are the low-maintenance choice for a property that wants privacy without a refinishing schedule. We build vinyl and composite driveway gates on welded aluminum or steel frames, with the panel material carried rather than load-bearing, which is the only way a vinyl gate stays flat through a Henderson summer.
Cantilever Slide Gates
Cantilever slide gates carry their weight on truck assemblies set back from the opening, so nothing crosses the driveway and nothing fills with grit. We build and service cantilever gates for HOA entrances, storage yards, contractor lots, and long private drives, with counterbalance tails sized to the span and trucks rated well above the gate weight.
Automatic Gate Openers & Operators
Automatic gate openers are where most of a gate budget quietly goes, and where nearly every callback starts. We install, program, and repair LiftMaster, DoorKing, FAAC, Ramset, and Mighty Mule operators in linear arm, articulated arm, underground, and slide gate configurations, sized to the leaf rather than to the invoice.
Access Control & Keypads
Gate access control is the difference between a gate you actually use and a gate you leave propped open. We install keypads, exit loops, card and fob readers, app-based controllers, radio receivers, and Knox box fire access, and the setup most Henderson homes really need lands at $400 to $1,500 on top of the operator.
Telephone Entry & Video Intercoms
Telephone entry systems let a visitor at the gate call your phone, and they are the right answer for multi-unit properties, HOAs, and shared driveways rather than single homes. We install, program, and convert DoorKing, Linear, and Viking entry panels, including the cellular conversions that copper line retirement has made unavoidable across the valley.
Safety Sensors & UL 325 Compliance
UL 325 requires two independent means of entrapment protection on most powered gates, which means photo eyes or safety edges are part of a compliant installation and not an accessory line item. We install, test, and document photo-eye sensors, monitored safety edges, loop detectors, and correct Class I through Class IV operator classification on both new gates and existing ones that were never set up properly.
Solar Gate Motors & Battery Backup
Solar gate operators make sense when trenching power to the gate would cost more than the panel, and at $10 to $25 per foot of trench that math tips quickly. We size and install solar gate motors with the panel, charge controller, and battery matched to your actual cycle count, and a solar package typically adds $400 to $1,200 over a comparable standard operator.
Custom & Estate Gates
Custom estate gates are fabricated to one opening, one slope, and one house, which is the entire point of them. We design and build arched, radius-top, and split-level estate entrances in wrought iron, ornamental steel, and aluminum, with matching pedestrian gates, columns, and fence runs so the entrance reads as one deliberate piece rather than three purchases.
Garage Gate Installation
Garage gate installation covers the opening a garage door alone leaves exposed, and it is the security addition we are asked for most on both homes and parking structures. We install roll-up security grilles, side-folding and scissor gates, sliding garage security doors, and parking-garage entry gates and barrier arms, with the operators and access control to run all of them.
Security Fencing & Perimeter
A gate without a fence beside it is a very expensive suggestion, which is why perimeter fencing is half of most security jobs we quote. We install ornamental steel and aluminum picket fencing, welded wire panels, anti-climb mesh, and commercial chain link with privacy slats, tied into the gate so the whole line reads and functions as one continuous barrier.
Commercial & Industrial Security Gates
Commercial security gates have a different job than residential ones: higher cycle counts, far more users, and a fire marshal who is going to look at them. We install and maintain heavy slide and swing gates, Class III and Class IV operators, barrier arms, and multi-user access control for HOAs, apartment communities, self-storage properties, distribution yards, and municipal sites across the Las Vegas Valley.
Pedestrian & Walk Gates
Pedestrian gates are the ones you actually touch every day, which is why the hardware on them matters more than the design. We build and install walk gates, side yard gates, courtyard entries, and pool barrier gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, matched to the driveway gate and fitted with locks and closers rated for the number of times a day they get used.
Welding & Gate Fabrication
Not every job is a whole gate, and our shop takes the metalwork nobody else wants to bid. We fabricate and repair gate frames, hinge posts, columns, handrails, window guards, dumpster enclosure gates, and custom brackets in steel and aluminum, with MIG and TIG welding, in-house blasting, and powder coat finishing on the same equipment we use for our own gates.
What each of our services covers in Henderson
Open any service to see exactly what is included before you call.
Driveway Gates
Driveway gates are the single biggest change you can make to how a property reads from the street, and in Henderson they are also working equipment that has to survive ultraviolet exposure, blowing grit, and a hundred cycles a week. We design, fabricate, automate, and repair driveway gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, from a single 12-foot swing leaf to a 30-foot cantilever slide. The first decision is not the design, it is the geometry.
- driveway gates
- gates for the driveway
- metal driveway gates
- steel gates for driveway
- driveway gate designs
- electric driveway gates
- residential driveway gate installation
- double driveway gates
- driveway gate posts and footings
- driveway gate widths
- driveway gate repair
- driveway entrance gates
Swing Gates
Swing gates are the default driveway gate whenever the ground is level and there is arc room behind the opening, and they are the cheapest way to get a real gate that works. We build single and dual swing gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, hung on hinge posts sized for the leaf instead of whatever the fence crew left behind. The economics are simple: no track, no rollers, no counterbalance tail, and a shorter gate than the opening it fills.
- driveway swing gates
- swinging driveway gates
- single swing gate
- dual swing driveway gate
- heavy duty hinges for driveway gates
- swing gate operator
- gate hinge replacement
- gate post repair
- swing gate sagging fix
- articulated arm gate opener
- underground swing gate operator
- swing gate clearance and slope
Sliding & Rolling Gates
Sliding gates are the answer when the driveway slopes up, when there is no arc room for a leaf to swing, or when a car would otherwise have to wait in the road while the gate opens. We build and repair rolling V-track slide gates and cantilever slide gates in steel and aluminum, with sealed-bearing rollers and covered track wherever the design allows it, because open track in this valley fills with grit. There are two families and they behave differently.
- driveway sliding gates
- rolling driveway gates
- driveway slide gates
- v-track slide gate
- slide gate rollers
- slide gate operator
- gear rack slide gate
- sliding gate track repair
- sliding gate installation cost
- sliding gate for sloped driveway
- roller gate wheels replacement
- slide gate safety loops
Wrought Iron Gates
Wrought iron gates are the entrance most Henderson homeowners picture first, and they are also the ones most often built from stock too light to hold their shape. We forge and weld custom wrought iron and ornamental iron driveway gates from solid bar and heavy-wall tube in our own shop, then blast, prime, and powder coat them inside and out before they ever go on a truck. That distinction is the whole ballgame with iron.
- wrought iron gate
- wrought iron metal gate
- custom wrought iron gates
- ornamental iron driveway gates
- iron entrance gates
- wrought iron gate design
- black wrought iron gate
- arched wrought iron gates
- wrought iron gate repair
- repair iron gate
- iron gate re-welding
- hand-forged scrollwork and finials
Ornamental Steel Gates
Ornamental steel gates give you the mass and presence of iron at a lower price and with a lighter leaf for the operator to move. We fabricate ornamental steel driveway gates from square and rectangular tube in 14-gauge and 16-gauge wall, welded and finished exactly the way we finish iron, then matched to an operator that runs comfortably below its rated load. The difference between iron and ornamental steel is mostly how the material starts life.
- ornamental steel gates
- steel gates for driveway
- tube steel driveway gate
- 14 gauge steel gate
- powder coated steel gate
- horizontal slat steel gate
- modern steel driveway gate
- galvanized steel gate frame
- steel picket gate
- steel gate repair
- steel gate fabrication
- pre-galvanized square tube gate
Aluminum Gates
Aluminum gates do not rust and weigh roughly a third of what steel does for the same dimensions, which is easier on hinges, posts, and the operator. We build welded aluminum driveway gates from 6061 and 6063 extrusion, not the bolted thin-wall panel kits that gave aluminum its cheap reputation in the first place. The weight difference is not a marketing line, it is arithmetic.
- aluminum driveway gates
- welded aluminum gate
- aluminum gate installation
- powder coated aluminum gate
- 6061 aluminum gate frame
- rust free driveway gate
- lightweight driveway gate
- aluminum privacy gate
- aluminum gate repair
- aluminum vs steel gate
- aluminum estate gate
- aluminum pedestrian gate
Wood Gates
Wood gates give a warmth that metal cannot match, and in the high desert they need a steel frame underneath or they will twist inside two summers. We build cedar, redwood, and composite-clad driveway gates on fully welded steel frames, so the steel carries the structure and the wood does the looking. That construction detail is the entire difference between a wood gate that lasts and a wood gate that becomes a complaint.
- wood driveway gates
- cedar driveway gate
- redwood gate
- wood gate on steel frame
- wood privacy driveway gate
- wooden gate installation cost
- horizontal wood slat gate
- wood gate refinishing
- wood gate sagging repair
- composite clad wood gate
- wood gate automation
- wood and iron gate combination
Vinyl & Composite Gates
Vinyl and composite gates are the low-maintenance choice for a property that wants privacy without a refinishing schedule. We build vinyl and composite driveway gates on welded aluminum or steel frames, with the panel material carried rather than load-bearing, which is the only way a vinyl gate stays flat through a Henderson summer. Understand what vinyl is before you buy it.
- vinyl driveway gates
- vinyl gate installation cost
- composite driveway gate
- pvc driveway gate
- vinyl privacy gate
- vinyl gate on aluminum frame
- low maintenance driveway gate
- vinyl gate sagging
- vinyl gate repair
- vinyl fence and gate
- composite slat gate
- uv stabilized vinyl gate
Cantilever Slide Gates
Cantilever slide gates carry their weight on truck assemblies set back from the opening, so nothing crosses the driveway and nothing fills with grit. We build and service cantilever gates for HOA entrances, storage yards, contractor lots, and long private drives, with counterbalance tails sized to the span and trucks rated well above the gate weight. The no-ground-track design is why cantilever gates dominate commercial work and why they are increasingly the right answer on residential properties in this valley.
- cantilever slide gate
- cantilever gate installation
- commercial cantilever gate
- cantilever gate rollers
- truck assembly cantilever gate
- cantilever gate counterbalance
- no track slide gate
- hoa entrance slide gate
- cantilever gate repair
- gear rack slide operator
- heavy duty sliding gate
- cantilever gate post footings
Automatic Gate Openers & Operators
Automatic gate openers are where most of a gate budget quietly goes, and where nearly every callback starts. We install, program, and repair LiftMaster, DoorKing, FAAC, Ramset, and Mighty Mule operators in linear arm, articulated arm, underground, and slide gate configurations, sized to the leaf rather than to the invoice. Here is the one opinion we will push on anybody: spend on the operator and save on the design.
- automatic gate openers
- gate openers automatic
- automatic gate opening
- gate with automatic opener
- automatic electric gate openers
- gate electric opener
- automated driveway gates
- motorized driveway gates
- driveway gates automation
- liftmaster gate opener repair
- mighty mule gate opener repair
- electric gate opener troubleshooting
- automatic gate installation cost
Access Control & Keypads
Gate access control is the difference between a gate you actually use and a gate you leave propped open. We install keypads, exit loops, card and fob readers, app-based controllers, radio receivers, and Knox box fire access, and the setup most Henderson homes really need lands at $400 to $1,500 on top of the operator. Start with getting out, not getting in.
- gate access control
- gate keypad installation
- driveway gate keypad
- card reader gate access
- fob reader gate entry
- exit loop driveway gate
- smartphone gate opener
- gate remote programming
- rotating guest codes gate
- keypad repair gate
- wireless gate keypad
- knox box gate access
Telephone Entry & Video Intercoms
Telephone entry systems let a visitor at the gate call your phone, and they are the right answer for multi-unit properties, HOAs, and shared driveways rather than single homes. We install, program, and convert DoorKing, Linear, and Viking entry panels, including the cellular conversions that copper line retirement has made unavoidable across the valley. The copper problem is the one most boards are dealing with right now.
- telephone entry system
- gate call box installation
- doorking telephone entry
- cellular gate intercom
- video intercom gate
- apartment gate entry system
- hoa directory call box
- gate intercom repair
- lte gate entry conversion
- postal lock call box
- resident directory programming
- multi-tenant gate entry
Safety Sensors & UL 325 Compliance
UL 325 requires two independent means of entrapment protection on most powered gates, which means photo eyes or safety edges are part of a compliant installation and not an accessory line item. We install, test, and document photo-eye sensors, monitored safety edges, loop detectors, and correct Class I through Class IV operator classification on both new gates and existing ones that were never set up properly. The standard is not complicated once someone explains it.
- ul 325 gate compliance
- gate photo eye sensors
- gate safety edge
- entrapment protection gate
- class i class iv gate operator
- astm f2200 gate
- gate safety loop
- monitored safety device gate
- gate warning signage
- gate safety inspection
- photo eye alignment repair
- gate force limit adjustment
Solar Gate Motors & Battery Backup
Solar gate operators make sense when trenching power to the gate would cost more than the panel, and at $10 to $25 per foot of trench that math tips quickly. We size and install solar gate motors with the panel, charge controller, and battery matched to your actual cycle count, and a solar package typically adds $400 to $1,200 over a comparable standard operator. Solar works well here for the obvious reason, and it is worth stating plainly: this is one of the sunniest places in the country, and a panel that would be marginal in a cloudy climate is comfortably oversized in southern Nevada.
- solar gate opener
- solar powered driveway gate
- solar gate motor installation
- off grid gate operator
- gate battery backup
- dc gate operator solar
- solar panel gate kit
- charge controller gate
- agm battery gate opener
- no power at gate solution
- solar slide gate operator
- solar gate opener repair
Custom & Estate Gates
Custom estate gates are fabricated to one opening, one slope, and one house, which is the entire point of them. We design and build arched, radius-top, and split-level estate entrances in wrought iron, ornamental steel, and aluminum, with matching pedestrian gates, columns, and fence runs so the entrance reads as one deliberate piece rather than three purchases. The process starts with a drawing, not a catalog.
- custom estate gates
- luxury driveway gates
- arched entrance gate
- estate entry gate design
- custom gate fabrication
- monogram gate panel
- laser cut gate panels
- matching pedestrian gate
- gate columns and pilasters
- hillside estate gate
- split level driveway gate
- designer driveway gate
Garage Gate Installation
Garage gate installation covers the opening a garage door alone leaves exposed, and it is the security addition we are asked for most on both homes and parking structures. We install roll-up security grilles, side-folding and scissor gates, sliding garage security doors, and parking-garage entry gates and barrier arms, with the operators and access control to run all of them. On a house, the usual job is a security grille or folding gate behind or in front of the garage door.
- garage gate installation
- automatic garage gate opener
- garage security gate
- roll up security gate
- roll down garage gate
- side folding security grille
- scissor gate for garage
- parking garage gate
- parking barrier arm
- parking gate arm operator
- garage gate repair
- security screen garage door
Security Fencing & Perimeter
A gate without a fence beside it is a very expensive suggestion, which is why perimeter fencing is half of most security jobs we quote. We install ornamental steel and aluminum picket fencing, welded wire panels, anti-climb mesh, and commercial chain link with privacy slats, tied into the gate so the whole line reads and functions as one continuous barrier. Start with what the fence is actually for, because the answer changes the specification completely.
- security fencing installation
- ornamental steel fence
- aluminum picket fence
- perimeter security fence
- anti climb fence panels
- commercial chain link fence
- privacy slat fence
- welded wire security fence
- fence and gate matching
- pool code fence
- fence post footings caliche
- property line fencing
Commercial & Industrial Security Gates
Commercial security gates have a different job than residential ones: higher cycle counts, far more users, and a fire marshal who is going to look at them. We install and maintain heavy slide and swing gates, Class III and Class IV operators, barrier arms, and multi-user access control for HOAs, apartment communities, self-storage properties, distribution yards, and municipal sites across the Las Vegas Valley. Duty cycle is the number that drives every other decision.
- commercial security gates
- industrial gate installation
- hoa entrance gate service
- apartment complex gate
- self storage gate system
- warehouse yard gate
- class iv gate operator
- commercial gate maintenance contract
- high cycle gate operator
- gate access control commercial
- knox box gate requirement
- commercial gate repair
Pedestrian & Walk Gates
Pedestrian gates are the ones you actually touch every day, which is why the hardware on them matters more than the design. We build and install walk gates, side yard gates, courtyard entries, and pool barrier gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, matched to the driveway gate and fitted with locks and closers rated for the number of times a day they get used. The first rule is separation.
- pedestrian gate installation
- walk gate driveway
- side yard gate
- self closing self latching gate
- pool barrier gate
- matching walk gate and driveway gate
- keypad pedestrian gate
- electric strike gate lock
- magnetic lock pedestrian gate
- courtyard entry gate
- ada gate hardware
- walk gate repair
Welding & Gate Fabrication
Not every job is a whole gate, and our shop takes the metalwork nobody else wants to bid. We fabricate and repair gate frames, hinge posts, columns, handrails, window guards, dumpster enclosure gates, and custom brackets in steel and aluminum, with MIG and TIG welding, in-house blasting, and powder coat finishing on the same equipment we use for our own gates. Repair welding is the bulk of it.
- gate welding repair
- custom metal fabrication
- mobile welding gate
- steel gate frame repair
- hinge post replacement
- handrail fabrication
- window guard fabrication
- dumpster enclosure gate
- aluminum tig welding
- powder coating service
- custom bracket fabrication
- on site welding repair
What Henderson property owners ask us
Which gate services does Henderson Gate Pros handle?
Everything listed on this page, residential and commercial, across Henderson and the Las Vegas Valley. Work is done by our own crews rather than handed to whoever is cheapest that week, which is the only way the workmanship warranty means anything.
Can I combine more than one service in a single job?
Yes, and it is usually cheaper. Bundling gate work into one mobilization saves setup, disposal and travel, and it means one crew, one schedule and one written free estimate instead of three contractors blaming each other.
Do you give free estimates for every service?
Every one. We come out, measure, look at the real condition of the work area, and put an itemized free estimate in writing with materials and scope spelled out. No charge, no deposit, and no obligation to book.
What Henderson Customers Say
They built a dual swing iron gate for our place and wired the keypad and exit loop. The crew set the posts deep and the gate still closes dead even a year later. No sag, no drift.
Our slide gate had been grinding for months. They found the rollers packed solid with dust, replaced them with sealed-bearing rollers, and swept and covered the track. It runs quiet now.
Got three bids for an automatic gate. These were the only people who checked the slope and the power at the gate before quoting. The solar operator has not missed a cycle.
The old operator board died and the gate sat open all weekend. They diagnosed it, replaced the board on the same visit, and reprogrammed every remote and the keypad codes.
Our HOA had two cantilever gates cycling badly and a call box that could no longer complete a call. They converted it to cellular, replaced the rollers, and gave us a written safety report.
The horizontal slat gate they fabricated looks better than the drawing. They also caught that our photo eyes had never been wired correctly by the previous company and fixed it.
Service Areas
Henderson Gate Pros serves Henderson, NV and surrounding communities including: