Henderson Cantilever Slide Gates — Residential & Commercial

Henderson Gate Pros provides professional cantilever slide gates in Henderson, NV for residential and commercial properties across the Las Vegas Valley. Cantilever slide gates carry their weight on truck assemblies set back from the opening, so nothing crosses the driveway and nothing fills with grit. We build and service cantilever gates for HOA entrances, storage yards, contractor lots, and long private drives, with counterbalance tails sized to the span and trucks rated well above the gate weight. The no-ground-track design is why cantilever gates dominate commercial work and why they are increasingly the right answer on residential properties in this valley. A rolling gate needs a clean, level V-track across the apron, and out here that track becomes a collection channel for fine dust, decomposed granite, and whatever the wind delivers. Sweep it or the gate starts to grind. A cantilever gate has nothing at ground level to collect anything, so the maintenance burden drops to greasing sealed bearings and checking alignment. The tradeoff is side room and structure. A cantilever gate has to be roughly 50 percent longer than the opening it covers, because the counterbalance tail must extend past the rear truck to keep the leaf level. A 24-foot opening therefore wants about 36 feet of gate and 36-plus feet of clear fence line to receive it. The posts are structure, not fence posts: on a commercial install we set 4-inch to 8-inch heavy-wall posts in footings sized for the overturning load, well below the caliche hardpan, and we would rather over-build a footing than come back to re-plumb a post that has been walking for two years. Frame construction follows span. Standard cantilever framing uses a top and bottom horizontal member with vertical uprights and diagonal bracing, in 14-gauge or heavier wall depending on length and infill. Chain link with privacy slats, ornamental picket, horizontal slat, and solid panel infill are all common, and solid infill is where wind load becomes a serious design input rather than a footnote. Truck assemblies, top guide rollers, and the internal track all get sized to the gate weight with headroom, because a truck running at its limit is a truck that fails on a hot afternoon with a queue of cars behind it. Automation is almost always gear rack rather than chain on a cantilever, with a Class III or Class IV operator depending on whether the users are the general public or a supervised group. Safety is not optional: monitored photo eyes on both sides of the opening, safety edges on the leading and trailing edges where UL 325 requires them, safety loops that hold the gate open while a vehicle is in the opening, and warning signage. Emergency access is part of the design too, so a Knox box, key switch, or radio receiver goes in where the fire code requires one. Repairs we handle: truck and roller replacement, bent frame straightening, gear rack replacement, re-plumbing posts, operator replacement, and rebuilding gates that have been dragging on a bent guide for so long the frame has taken a set.

With 18+ years of experience, our licensed and insured team brings the right materials and equipment to every job — wrought iron and ornamental steel fabrication, powder-coated aluminum gates, cantilever and roller slide gates, LiftMaster, DoorKing and FAAC operators, Class I-IV operator classifications, UL 325 entrapment protection — and backs the work with a written workmanship warranty. We serve Henderson and nearby communities including Boulder City, Paradise, Winchester, Spring Valley.

What We Handle

Why Henderson Chooses Henderson Gate Pros

• ✓Over 18 years installing and automating gates across the Las Vegas Valley
• ✓In-house metal shop — we weld and powder coat our own gates instead of drop-shipping panels
• ✓UV-stable powder coat over blasted and primed steel, because desert sun is what kills a finish
• ✓Sealed roller bearings, covered track and sealed operator enclosures to keep blowing dust out

Every cantilever slide gates project in Henderson gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.

Ready to get started? Call (844) 511-2320 for a free cantilever slide gates free estimate in Henderson, or request a quote and we'll get right back to you.

Related Services

• Driveway Gates
• Swing Gates
• Sliding & Rolling Gates
• Wrought Iron Gates