Henderson Gate Pros provides professional swing gates in Henderson, NV for residential and commercial properties across the Las Vegas Valley. Swing gates are the default driveway gate whenever the ground is level and there is arc room behind the opening, and they are the cheapest way to get a real gate that works. We build single and dual swing gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, hung on hinge posts sized for the leaf instead of whatever the fence crew left behind. The economics are simple: no track, no rollers, no counterbalance tail, and a shorter gate than the opening it fills. A swing gate is also faster than a slide gate, cycling in roughly 12 to 20 seconds against 20 to 35 for a comparable slider, which you notice every single day at the end of your own driveway. Where swing gates fail is slope and wind, and both are predictable. If the drive rises as the gate opens, the leaf binds within a couple of feet of travel, and no amount of hinge adjustment fixes geometry. The usual workarounds are a rising-butt hinge, swinging the gate outward toward the street where setback allows it, or accepting that the property wants a slide gate. Wind is the other one. A solid privacy leaf 12 feet wide and 6 feet tall is 72 square feet of sail hanging off one post, and out here the gusts that come through the valley in spring put real cyclic load on that hinge point. We either gap the boards, spec a picket design, or size the posts and hinges for the load rather than hand-waving it. Hinges deserve their own paragraph because they are the part that gets cheaped out on most often. Heavy-duty driveway gate hinges take the whole leaf weight through two small bearing surfaces, and a $30 bolt-on hinge under a 400-pound gate is a callback with a date on it. We use greasable ball-bearing or bushed steel hinges rated well above the leaf weight, welded to a hinge stile heavy enough not to flex, on a post set deep in concrete. When a gate starts dragging, the tell is the gap at the latch side: if it is wider at the top than the bottom, the post is leaning and the hinges are innocent. Automation on a swing gate can be a linear arm, an articulated arm for posts set back behind the pivot, or an underground operator where the design should not show hardware at all. Underground units look best and cost the most, and they are the one place where drainage matters in a climate that barely has any, because the vault will eventually see irrigation water. Every operator gets photo eyes, an exit loop where the driveway allows a saw cut, force limits set to UL 325 rather than to the maximum, and a manual release you actually know how to use. Repairs we handle constantly: resetting leaning posts, re-welding cracked hinge stiles, replacing worn hinges and cane bolts, straightening leaves that met a bumper, adjusting drop rods and latch alignment, and refinishing gates the sun has chalked out.
With 18+ years of experience, our licensed and insured team brings the right materials and equipment to every job — wrought iron and ornamental steel fabrication, powder-coated aluminum gates, cantilever and roller slide gates, LiftMaster, DoorKing and FAAC operators, Class I-IV operator classifications, UL 325 entrapment protection — and backs the work with a written workmanship warranty. We serve Henderson and nearby communities including Boulder City, Paradise, Winchester, Spring Valley.
What We Handle
Everything our swing gates in Henderson covers
One crew, one point of contact, and the full range of swing gates work in Henderson, NV. If it is on this list we do it in house rather than handing it to a subcontractor:
- driveway swing gates
- swinging driveway gates
- single swing gate
- dual swing driveway gate
- heavy duty hinges for driveway gates
- swing gate operator
- gate hinge replacement
- gate post repair
- swing gate sagging fix
- articulated arm gate opener
- underground swing gate operator
- swing gate clearance and slope
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Henderson services.
Materials, equipment and how we do swing gates
The difference between swing gates that lasts and swing gates that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with wrought iron and ornamental steel fabrication, powder-coated aluminum gates, cantilever and roller slide gates, LiftMaster, DoorKing and FAAC operators, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Henderson job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 18+ years of gate work in the Las Vegas Valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do swing gates outside Henderson
Henderson Gate Pros covers Henderson and the surrounding communities of the Las Vegas Valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Swing Gates in Boulder City, NV — Clark County, population 14,885
- Swing Gates in Paradise, NV — Clark County, population 191,238
- Swing Gates in Winchester, NV — Clark County, population 36,403
- Swing Gates in Spring Valley, NV — Clark County, population 215,597
- Swing Gates in Enterprise, NV — Clark County, population 221,831
- Swing Gates in Sunrise Manor, NV — Clark County, population 205,618
Start on the Henderson Gate Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Henderson Chooses Henderson Gate Pros
- ✓Over 18 years installing and automating gates across the Las Vegas Valley
- ✓In-house metal shop — we weld and powder coat our own gates instead of drop-shipping panels
- ✓UV-stable powder coat over blasted and primed steel, because desert sun is what kills a finish
- ✓Sealed roller bearings, covered track and sealed operator enclosures to keep blowing dust out
Every swing gates project in Henderson gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free swing gates free estimate in Henderson, or request a quote and we'll get right back to you.